Sømløs Hydraulic Pipe syrefast glødet/bejdset

Acid-resistant quality hydraulic pipe for mounting cutting ring and flare fittings in high-pressure systems. Suitable for bending. Plugged at the ends with plastic plug. NOTE: Be aware that working pressure is calculated as indicative based on the supplier's minimum requirements for bent pipes (RP 0.2%). For straight pipes (RP 1%) it is approximately 15% higher. The following minimum requirements are used here: Static: K (RP 0.2%)=205, DNV: K (RP 0.2%)=205, Dynamic: K=185. If you want to ensure that the pipes can withstand higher pressure, you must use the actual figures from the certificate and insert them into the formulas in the Technical Guide (See link). This can often provide 30% higher pressure.