Schneider RXZ Relay Socket with push-in spring terminals

Zelio RXM is a series of industrial plug-in relays, suitable for both simple and complex automation systems. The relays are available with either 2 C/O contacts with 12A, 3 C/O contacts with 10A, or 4 C/O contacts with 6A and can be chosen with or without test button and built-in LED. There is also an option for 4 C/O with gold-plated contact sets for switching of low currents and voltages. In the socket, there is the option of inserting a protection module (diode, varistor, or RC network) directly into the relay socket if required. The sockets are available with either mixed terminals or separate terminals depending on preference. RXZE14P is a DIN-rail socket with separate push-in spring clamps designed for RXM socket relays with 2 or 4 C/O contacts. At the bottom of the socket, the terminals for supplying the coil are located, and at the top, the terminals for the contact sets. The socket has push-in spring clamps for easy and quick mounting without the use of tools and optimal protection against vibrations. The socket has a width of 31 mm and it is possible to insert protection modules next to the supply. RXZE14P has a maximum load of 12A in combination with an RXM2 relay and 6A in combination with an RXM4 relay. Further marking of the socket can be made with RXZL300 marking plates that are easily pressed onto the socket. Each terminal accommodates mounting of 2 wires with a cross-section between 0.5..1.5 mm² and has a built-in test point for testing and inspection. For connection of more than one socket to the same supply, the RSZS02 link can be inserted at the A2 terminal and this is also possible across other sockets with push-in terminals. The socket is marked with both NEMA and IEC designations.