LK Fuga In-wall box

LK FUGA® AIR boxes flush box 1½ module For flush mounting in plastered walls of brick, aerated concrete, etc. Boxes support the following frame assortment. See FUGA combination table. Boxes can be mounted with the following frame types: Technical mounting frame, and design frames: CHOICE, PURE, SOFT. Boxes can also be mounted with technical mounting frame type SLIM, and design frames SLIM for these. Can be rotated 180°. Can be combined vertically and horizontally. Installation of inserts in boxes can be done in one or more of the following ways: via block pieces, via front screws for Technical mounting frame, and via screw towers in the bottom. Boxes are windproof IP40. Can be fixed with silicone-free construction foam. Inserts must then be secured with switch screws. If fixing of the box is done with nails/screws in the bottom wells of the box room, the screw head must be min 1 mm below the top edge of the well.