Sømløs Hydraulic Pipe syrefast blankglødet

Acid-resistant quality hydraulic pipe for installing ferrule and flaring fittings in high-pressure systems. Suitable for bending. Plugged at ends with plastic caps. NOTE: Be aware that the working pressure is calculated as a guideline based on the supplier's minimum requirements for bent pipes (RP 0.2%). For straight pipes (RP 1%), it is about 15% higher. The following minimum requirements are used here: Static: K (RP 0.2%)=205, DNV: K (RP 0.2%) = 205, Dynamic: K=185 To ensure that the pipes can withstand higher pressure, use the actual figures from the certificate and insert them into the formulas in the Technical guide (See link). This can often result in 30% higher pressure.